Mct mtk bypass rev 2,mct mtk bypass tool version 4, oppo mtk bypass tool,xiaomi mtk auth bypass,oppo mtk auth bypass,gsmvntool,mct mtk bypass v3. Smartphones with MediaTek Helio P35 MT6765 processor. List of smartphones that works with MediaTek Helio P35 MT6765 processor inside. China 4GB 128GB. Southeast Asian. New Update MTK 2.1.52 😍. Add Support: ☑ MT6755. MT6765 / MT6757 / MT6762 / MT6771 / MT6752 / MT8127 / MT6797 / MT8163 / oppo, Redmi, Realme, vivo Oppo F11 pro Oppo A11K Oppo A31 Oppo A12 Oppo A5s Oppo A1k Realme C11 Redme 9A. File Information: File Name: R3 Pro MTK v. Mct mtk bypass rev 2,mct mtk bypass tool version 4, oppo mtk bypass tool,xiaomi mtk auth bypass,oppo mtk auth bypass,gsmvntool,mct mtk bypass v3. Tick mark on 'Enable' option to enable custom upload of MTK DA file. Click on the 'DA' button to load the 'Vivo Y12 DA file' from extracted folder. So, guys, this is how you can use Vivo Y12 Secure DA files using multiple MTK tools. Please note that some of these Secure DA files only work with specific MTK tools.
Did you know that you can actually Flash Vivo 1808 Y81 ODM MTK MT6765 with UFI Box or Dongle? Today, i will show you How To Flash Vivo 1808 Y81 ODM MTK MT6765 using UFI Dongle Software.
Links To Follow:
- Conclusion
Instructions:
- Open UFI Sofware
- Select Vivo Y81 ODM from the list, and download the firmware thereafter, if you can't, Download here
- Once downloaded, extract the zip file to get individual images for flashing. You can as well, right click on the software and demand UFI software to do extraction for you.
- After downloading and extracting either by manual method, or letting the software to do it for you, i.e if you downloaded firmware using UFI Software, select Brand as 'Vivo' from the model drop down, click on Mediatek
- Next, select Model as Vivo Y81 ODM, if you downloaded firmware using UFI support, after extraction, you will find Scatter file extracted and renamed for you, just click on the selection and choose PD1732F…..
Instruction For Manual Firmware Loading, For Those Who Downloaded From This Page:
- For manual loading of firmware, if you downloaded file from this page, select MT6765, select model and load scatter file.
- Go to Download Agents(DA), select the corresponding DA file suitable for Vivo 1808 Y81 ODM.
- Go to Scatter file section, double click on the selection and choose MT6765_Android_scatter.txt, load
- Press Flash and connect your Vivo y81 device powered off.
- Once device is successfully connected, flashing process should begin by sofware verifying SOC and thereafter, the main process, will start.
- Wait for the period of time the flashing process will complete, and once done, you should have your vivo device rebooted. done.
See Our Flashing Logs:
See Our Flashing Logs:
Model: [Vivo] Y81 ODM
Model: [Vivo] Y81 ODM
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: k62v1_64_bsp
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[Samsung] RD64MB 15010052 4436344D 42xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[Samsung] DH6DMB 15010044 4836444D 42xxxxxx xxxxxxxx
[Samsung] DV6DMB 15010044 5636444D 42xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] GP6BMB 15010047 5036424D 42xxxxxx xxxxxxxx
[Samsung] GE6BMB 15010047 4536424D 42xxxxxx xxxxxxxx
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: k62v1_64_bsp
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[Samsung] RD64MB 15010052 4436344D 42xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[Samsung] DH6DMB 15010044 4836444D 42xxxxxx xxxxxxxx
[Samsung] DV6DMB 15010044 5636444D 42xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] GP6BMB 15010047 5036424D 42xxxxxx xxxxxxxx
[Samsung] GE6BMB 15010047 4536424D 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: PD1732F_EX_A_2.3.1_vivo_mtk_alps-release-o1.mp6-pre4_mt6762
BROM version[1]: 7.1917.3.0
DownloadAgent: DA_PL.bin
hash: f5b40a757b95c0d4e4ab1a1fdbb2522750568e6c, size: 528.48 KiB
version: 3.3001.2018/03/22019/10/17 03:32:05, start addr: 0x40000800
Connecting to BootROM…
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)… Done
Detected [BootROM] MediaTek USB VCOM (Android) (COM99)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom…
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
Please press power button for 10 secs or disconnect and reconnect the battery(if possible) and retry!
(boot_rom.cpp, line:103)
AUTH info: MTK, version: 1
Firmware package: PD1732F_EX_A_2.3.1_vivo_mtk_alps-release-o1.mp6-pre4_mt6762
BROM version[1]: 7.1917.3.0
DownloadAgent: DA_PL.bin
hash: f5b40a757b95c0d4e4ab1a1fdbb2522750568e6c, size: 528.48 KiB
version: 3.3001.2018/03/22019/10/17 03:32:05, start addr: 0x40000800
Connecting to BootROM…
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)… Done
Detected [BootROM] MediaTek USB VCOM (Android) (COM99)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom…
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
Error: -1073348607 (STATUS_BROM_CMD_STARTCMD_FAIL)
Please press power button for 10 secs or disconnect and reconnect the battery(if possible) and retry!
(boot_rom.cpp, line:103)
AUTH info: MTK, version: 1
Firmware package: PD1732F_EX_A_2.3.1_vivo_mtk_alps-release-o1.mp6-pre4_mt6762
BROM version[1]: 7.1917.3.0
DownloadAgent: DA_PL.bin
hash: f5b40a757b95c0d4e4ab1a1fdbb2522750568e6c, size: 528.48 KiB
version: 3.3001.2018/03/22019/10/17 03:32:05, start addr: 0x40000800
Connecting to BootROM…
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)… Done
Detected [PL] MediaTek PreLoader USB VCOM_V1632 (Android) (COM11)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom…
Sending Download Agent…
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 768 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: GD6BMB (0x474436424d42), rev: 0x01, serial number: 0xAFE09724
Manufacturing date: Mar 2018
CID: 15010047 4436424D 4201AFE0 97243527
Capacity: 29.13 GiB(31,281,119,232 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB (key exist)
User area: 29.12 GiB(31,268,536,320 bytes)
USB speed: High-Speed
Verifying SoC: passed
Verifying CID: passed
Writing preloader, size: 245.49 KiB
Writing recovery, size: 22.83 MiB
Writing survival, size: 30 MiB
Writing cust, size: 9.75 MiB
Writing efuse, size: 512 bytes
Writing md1img, size: 22.41 MiB
Writing md1dsp, size: 6.46 MiB
Writing spmfw, size: 27.39 KiB
Writing scp1, size: 562.94 KiB
Writing scp2, size: 562.94 KiB
Writing sspm_1, size: 383.08 KiB
Writing sspm_2, size: 383.08 KiB
Writing lk, size: 1.44 MiB
Writing lk2, size: 1.44 MiB
Writing boot, size: 10.40 MiB
Writing logo, size: 477.27 KiB
Writing odmdtbo, size: 115.48 KiB
Writing tee1, size: 462.69 KiB
Writing tee2, size: 462.69 KiB
Writing vendor, size: 542.77 MiB
Writing system, size: 3.81 GiB
Writing cache, size: 6.10 MiB
Writing userdata, size: 1.48 GiB
Completed in 3 mins 12.453 s
Model: [Vivo] Y81 ODM
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: k62v1_64_bsp
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[Samsung] RD64MB 15010052 4436344D 42xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[Samsung] DH6DMB 15010044 4836444D 42xxxxxx xxxxxxxx
[Samsung] DV6DMB 15010044 5636444D 42xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] GP6BMB 15010047 5036424D 42xxxxxx xxxxxxxx
[Samsung] GE6BMB 15010047 4536424D 42xxxxxx xxxxxxxx
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Conclusion: Flashing Vivo phones has never been easy, especially, in the absence of Auth File, so UFI Box gives a more easy access to flashing because of the presence of Auth File. Having known How To Flash Vivo 1808 Y81 ODM MTK MT6765, if there's any other suggestive flashing you would want us to help you with, write on this article's comment section and we will provide a guide and link up with files.
Angle360 provides Tech Tips, Remote Repair Assistance for G.S.M Gadgets & Computer Software related problems, Tech educational tips, How-to, e.t.c. If you want to know who owns this site and how activities on here are carried, then do so at your own convenience. To explain briefly; 'we're Three-In-One' family.
Contents
Mtk Mt6765
- 1 twrp 3.3.1 For Mediatek MT6765 Phone:
- 1.1 Note:
twrp 3.3.1 For Mediatek MT6765 Phone:
Download twrp 3.3.1 Recovery For Mediatek MT6765 Devices With Suitable Android OS. Here we Share twrp 3.3.1 for android 8.0, android 8.1 & Android 9.0 Devices With Mediatek MT6765 SoC. This is a Port Recovery which Can be used to Port twrp For Same Mediatek Devices. You Can also try This Recovery on Your Mediatek MT6765 SoC based devices Without Port it bootable on Many Mediatek Devices but Many Functions Like touch and Mount issue May Present.
Note:
- Rooting May Void Your Device Warranty.So Make a Backup of Your Data and ROM..
- Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.
Features of twrp 3.3.1:
- Make a Complete Device backup
- Restore
- Install ZIP and img Files
- New> Reboot to EDL on QCOM Phone
- Reboot to Fastboot, Recovery & EDL mod
- Install Custom ROM and GSI Images
- Delete & modify Any System File using inbuild File manager
- Wipe data Without Storage (Great Do a factory Reset Without Wiping the Phone Storage.)
- And Much More Nothing to Say try Your Self.
Download:
Mtk Mt6765 Vs Snapdragon 660
How to Install twrp Recovery:
- First of all We Need to Setup Platform tools So Download From above and extract the zip File.
- Now Download and Extract recovery.img [Must rename recovery.img] file Inside the adb tools Folder.
- Switch off Phone and together Press Volume Down and Power button it Will boot it in fastboot Mod.
- Then Connect Phone to PC using the usb cable.
- Now open CMD in the Platform Folder and type below Code.
Check Device by Sending below Command:
unlock bootloader by Sending below Command:
Mtk Mt6765 Processor Good For Gaming
flash Recovery by Sending below Command:
